Characteristics Of Thick Plate High Speed Servo Machine

1. Using a digital computer to control constant temperature heating and cooling, to avoid the phenomenon of thinning the center of the thick plate during the heating process;
2. The forming process involves blowing bubbles first, spreading the sheet, and then performing blow molding, cooling, and demolding;
3. This machine adopts coil material, which is fed by the beam pulling plate. During the heating process, the forming area is also cooled during the forming process, reducing the waste of heat source in the electric furnace;
4. Due to the use of a large number of continuous feeding methods, the speed is three times that of ordinary vacuum molding machines, thereby saving a lot of electrical energy;
5. Adopting computer control, the entire system is equipped with MHI (Human Machine Interface). The driving device has fast response speed, reasonable execution component structure, and the display system can monitor in real-time.