Operation Method Of Blister Packaging Machine

① Prepare drugs and packaging materials, replace batch number templates, install PVC and aluminum foil, check cooling water, and carefully clean equipment;
② Turn on the power switch and connect compressed air;
③ Press the heating button and adjust the heating and sealing temperature control tables to the appropriate temperature;
④ Pull the PVC hard sheet through the channel under the punching knife, and pull the aluminum foil under the heat sealing plate;
⑤ When the heating plate and heat sealing plate are raised to the appropriate temperature, adjust the cooling temperature gauge to the appropriate temperature (usually 30 ℃);
⑥ When the medicine fills the entire feeding track, press the green button of the motor to run the empty car. After the blowing, heat sealing, and punching meet the requirements, press the tablet hopper vibration button and planetary fabric switch;
⑦ When adjusting the cutting process, ensure that the cutting meets the requirements and proceed with normal packaging;
⑧ After packaging, shut down in the following order: press the tablet hopper shutdown button - press the motor red button - stop the host - turn off the main power switch - close the intake valve - close the intake valve. Then it's cleaning the machine and the site, maintaining the packaging equipment