Working Principle And Process Flow Of Bubble Packaging Machine

Roller blister packaging machine
The working principle of roller type blister packaging machine: The formed film is heated and softened by a heating device, and the blister is sucked out by vacuum negative pressure on the roller type forming mold roller. The filling device fills the packaging material into the blister, and then, through the roller type heat sealing device, the single-sided adhesive coated covering film is sealed on the surface of the material with the blister at the appropriate temperature and pressure, and the packaging material is sealed inside the blister. After being typed and stamped with a printing device, the batch number and the broken line are printed, and finally the punching device is used to cut into a certain size of product blocks.
Flat blister packaging machine
The working principle of a flat blister packaging machine: The formed film is heated and softened by a flat heating device. In the flat forming device, compressed air is used to blow the softened film into a blister. The filling device fills the packaging material into the blister, and then sends it to the flat sealing device. At the appropriate temperature and pressure, the covering film is sealed with the formed film, and then the batch number and break line are printed by the typing and stamping device, Finally, the punching device cuts the product plate into the specified size.
Roller plate blister packaging machine
The roller plate blister packaging machine is developed on the basis of roller and plate blister packaging machines, which uses a plate forming device for blow molding (positive pressure forming) and a roller sealing device for sealing. Its working principle is basically the same as the above two types